How to Measure a Torsion SpringHow to Measure a Torsion Spring
What is a High Cycle Spring?What is a High Cycle Spring?

Extension Springs (260-300 Lbs)

Double Car Doors Extension Springs (260-300 Lbs)
Extension Springs (260-300 Lbs)
Item#2106056
$98.00
This item is currently out of stock!

Product Description

We need the door weight and door height.

1. The pull weight of an extension spring is determined by the color code found on the end of the spring.
(Refer to Color Code Chart below.)
2. Measure door height. Standard height is 6 ft. 6 inches or 7 ft. If your door is over 7 ft. high, call for pricing.

Color Code
Pull Weight (Lbs.)
Pull Weight (Lbs.)
(Single car doors)
(Double car doors)
Gold
80
Lt. Blue
90
190
Tan
100
200
White
110
210
Green
120
220
Yellow
130
230
Blue
140
240
Red
150
250
Brown
160
260
Orange
170
270
Gold
180
280
Lt. Blue
190
290
Tan
200
300

If you cannot determine the color code, it will be necessary to weigh the door.

Here is how to weigh the door:

1. Put the door in the up position and secure. The best way to secure the door in the up
position is to snap a vice grip under both the bottom rollers.
2. Remove the springs from the door.
3. For a one car opening, lower the door onto one bathroom scale in the center of the
door and read weight.

For a double door
(16 ft. wide or larger) use two bathroom scales. Locate the
scales two feet in from each side. Take the weight of both scales and add together
for door weight.
4. Measure door height. Standard height is 6 ft. 6 inches, or 7 ft. If your door is over
7 ft. high, call for pricing.

NOTE: PLEASE ADHERE TO ALL SAFETY PRECAUTIONS.
For technical support call (877) 877 2919