How to Measure a Torsion SpringHow to Measure a Torsion Spring
What is a High Cycle Spring?What is a High Cycle Spring?

1 pair Garage Door Extension Springs 80-Lb-Pull-7' Door-New-Color Gold

1 pair Garage Door Extension Springs 80-Lb-Pull-7' Door-New-Color Gold
Item#80GOLD
$31.00
This item is currently out of stock!

Product Description

Your Garage Door Weighs 80lbs. Typically for Single car metal or Double wide fiberglass Garage Doors.

Garage Door Extension Spring, Includes Dasma Color Code Gold, High Quality Spring Wire, Rated for a Minimum of 10,000 Cycles, 25 In. to 42 In. Stretch  80 Lb pull and Double looped end For Use With 7 ft. High Garage Doors, Quantity 2.

If you cannot find a color code then it will necessary to weigh the door. See the instructions below. ALL SPRING SALES ARE FINAL



Spring I.D. By Color code.

Click Here

Extension Spring
Instructions


Determine the door weight and door height:
1. The pull weight of an extension spring is determined by the color code found on the end of the spring.
2. Measure door the height.The Standard height for most residential doors is either 6 ft. 6 inches high or 7 ft high. If your door is over 7 ft. high, call for pricing.
3.Springs are only sold in pairs. Please see the chart below for pricing. If you cannot determine the color code, it will be necessary to weigh the door.

How to weigh the door:
1. Raise the door to the full position and secure. The best way to secure the door in the up position is to snap a vice grip or C clamp under both the bottom rollers.
2. Remove the springs from the door.
3. For a one car opening, lower the door onto one bathroom scale in the center of the door and read the weight.
For a double door (16 ft. wide or larger) use two bathroom scales. Locate the scales two feet in from each side. Take the weight of both scales and add together for door weight.
4. Measure door height. Standard height is 6 ft. 6 inches, or 7 ft. If your door is over 7 ft. high, call for pricing.please double check all spring information.A no return policy is in effect on extension springs,all sales are final.

NOTE: THE COLOR CODES ARE THE OFFICIAL DASMA CODES USED BY MOST ORIGINAL MANUFACTURES DATING BACK TO 1990.


NOTE: PLEASE ADHERE TO ALL SAFETY PRECAUTIONS.


For Technical Support or To Order By Phone Please Call 800-829-6002
Monday thru Friday 9:00 AM to 5:00 PM